Main Features Models DisplayResin Parameters Resin ColorRecommended Printing Parameters

Anycubic ABS-Like Resin V2
Main Features

Excellent Toughness, Durability and Well-Performance

With its high toughness, strength, and impact resistance, the Anycubic ABS-Like Resin V2 is good for printing structural parts, tools, and other models that demand high performance. The printed models are suitable for drilling and tapping.

Recommendation Index

Improved toughness, more resistant to bending.

Durability

The final model shows excellent resistance to drops guaranteeing stability and durability. Moreover the model's durability is enhanced. The printed model can endure exposure to the natural environment for a year without cracks after proper cleaning and curing.

No Cracking Experimental Data

The experimental results show that the models printed with Anycubic ABS-Like Resin V2 can be stored for 3 years in natural environment without cracks after curing.

Water Washable Easy to Post-Process

Low viscosity and high fluidity facilitate cleanability and accommodate different cleaning methods like water, washing machine, and ultrasonic, catering to diverse scenarios. The cleaned model has a nonsticky surface, and the support is easier to remove. making post-processing less challenging.

Low-odor and Worry-Free Printing

The mild scent reduces discomfort for those sensitive to odors creating a more comfortable printing environment.

High Precision Minimal Shrinkage

With lower shrinkage, the risk of distortion and deformation is reduced, resulting in high molding accuracy and detailed models.

High Compatibility and Easy to Use

It is compatible with a variety of desktop LCD 3D printers and easy to use without requiring special treatment, making it suitable for both beginners and experienced users.

Anycubic ABS-Like Resin V2
Models Display

Anycubic ABS-Like Resin V2
Resin Parameters

UV Wavelength

365-405nm

Elongation at Break

30-40%

Density

1.1-1.2g/cm³

Molding Shrinkage

4.3-5.6%

Viscosity

180-200cPimPa·s

Flexural Strength

40-50MPa

Hardness

80-85D

Felxural Modulus

1000-1200MPa

Tensile Strength

85-45MPg

Heat Deflection Temp

60-65℃

Bottom Exposure Time

20-40s

Resin Wash

Water/Alcohol

Normal Exposure Time

1.5-3s

Shelf Life

1.5 Year

Anycubic ABS-Like Resin V2
Resin Color

Anycubic ABS-Like Resin V2
Recommended Printing Parameters

Anycubic ABS-Like Resin V2
Notes

Before use:

Shake the liquid resin before use;
Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.

When using:

Unscrew the cap and add it to the resin tank according to the equipment requirements;
Select the correct print parameters and settings for printing.

After use:

After printing, please use the matching tools for post-processing, including blades, diagonal pliers, tweezers, containers, and gloves; clean them with water.

Post-processing steps:

Remove the printed model from the molding platform with a blade.
Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then take it out and drained; Anycubic Wash and Cure machine s are suggested to ensure a better effect.
Proper processing, such as removing support, polishing, coloring, etc.

Wastewater post-process:

Do not discharge wastewater directly into the sewer to avoid contaminating groundwater.
Heat the wastewater, let most of the water evaporate, and then discard the residue after curing by curing machine and sunlight.

Anycubic ABS-Like Resin V2
Precautions

The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
Suggested operating temperature is 18-35℃, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60℃).
If the resin pigment settles, it can be used after stirring or shaking.
In order to ensure the performance of the resin, please takeout the model in time after cleaning to avoid the model soaking in water for a long time.
To ensure the mechanical properties of the model, please perform post curing in time after cleaning and drying.
To ensure the ideal performance of the curable material it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
- The intensity of mercury lamp or LED light source is 5-10mW/m2, and the duration is no more than 1 hour (self-regulation);
- The exposure time in the sun (summer) is around 1 hour;
- Proximity or long-term exposure under strong light sources such as high power high-pressure mercury lamps is prohibited;
- It is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive material.

PS: Material properties will vary depending on the molding equipment. post-curing method and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems while using, please feel free to contact us.

Anycubic ABS-Like Resin V2Main Features